Electronics and Software
To program the CX-10 with CMSIS and STM32 Hardware Abstraction Layer (HAL), the same hardware preparations are required. Installing Eclipse and GNU ARM development extension Follow the steps from this link: http://gnuarmeclipse.livius.net/blog/plugins-install/ Create a new project for CX-10 development Go … Read More »
As with all embedded systems, getting to blinky is the first thing you want. Please refer to the previous post on preparing the hardware to have a programmable setup with the flash memory of the processor cleared. Libopencm3 Most of … Read More »
The general steps are as follows: Solder wires to the board. Configure the STLink of the Discovery board. Apply external power to the Vdd pin of the SWD. Clear flash memory of the chip. The following items are required: CX-10 … Read More »